Skip to main content
NetApp Knowledge Base

Failure to update BMC from 13.10P1 to 13.11 due to verification error

  1. Last updated
  2. Save as PDF
Views:
47
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • BMC firmware update from 13.10P1 to 13.11
  • AFF-A400
  • ONTAP 9

Issue

After performing the BMC firmware upgrade using a Python script, the image verification failed during the verification phase. 

Upgrade and preserve BMC config
Download HTTP: http://10.65.145.24/SP-FIRMWARE/A400/BMC_FW_308-04196_13.11.ima
Connecting to 10.65.145.24 (10.65.145.24:80)
rom.ima              100% |*******************************| 32768k  0:00:00 ETA
Download HTTP: Success
Verify Firmware Image ...
[3434 : 3434 CRITICAL][flashlib.c:364]There is no flasher pipe

[3434 : 3434 CRITICAL][flashlib.c:813]Image verification failed, response status = 0

Verification error! ...
Error : 100%
Remove /tmp/rom.ima

Fail to update bmc

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.