Skip to main content
NetApp Knowledge Base

FAS8300 NodeIfInErrorsWarnAlert Received on Switchless cluster port e0c

Views:
156
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • FAS8300
  • ONTAP 9.9.1
  • SwitchLess Cluster

Issue

  • EMS reports NodeIfInErrorsWarnAlert.
[node02: nphmd: hm.alert.raised:alert]: Alert Id = NodeIfInErrorsWarnAlert , Alerting Resource = node02/e0c raised by monitor controller .
  • Switchless configuration

Enable Switchless Cluster: true

  • The CRC errors are increasing.

-- interface  e0c  (867 days, 2 hours, 9 minutes, 19 seconds) --

RECEIVE
Total frames:     4313m | Frames/second:      58  | Total bytes:       748g
Bytes/second:     9992  | Total errors:    70055  | Errors/minute:       0
Total discards:      0  | Discards/minute:     0  | Multi/broadcast: 12670k
Non-primary u/c:     0  | Errored frames:      0  | Unsupported Op:      0
CRC errors:      63680  | Runt frames:         0  | Fragment:           44
Long frames:         0  | Jabber:              0  | Length errors:       0
Alignment errors:    0  | No buffer:           0  | Pause:               0
Jumbo:           34546k | Error symbol:     6331  | Bus overruns:        0
Queue drops:         0  | LRO segments:     4252m | LRO bytes:         699g
LRO6 segments:       0  | LRO6 bytes:          0  | Bad UDP cksum:       0
Bad UDP6 cksum:      0  | Bad TCP cksum:       0  | Bad TCP6 cksum:      0
Mcast v6 solicit:    0  | Lagg errors:         0  | Lacp errors:         0
Lacp PDU errors:     0

  • Port e0c shows down after the cluster cable replacement.

slot 0: 40G/100G Ethernet Controller CX5
          e0c MAC Address:    d0:39:ea:38:40:4d (auto-unknown-fd-down)
                QSFP Vendor:         Amphenol
                QSFP Part Number:    112-00595
                QSFP Serial Number:  APF20339235667
          e0d MAC Address:    d0:39:ea:38:40:4e (auto-100g_cr4-fd-up)
              QSFP Vendor:         Amphenol
              QSFP Part Number:    112-00595
              QSFP Serial Number:  APF21329435568

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.