Error! in configuration script file at line number XXX during RCF upgrade on BES-53248 cluster switches
Applies to
- ONTAP 9
- BES-53248 cluster switches.
Issue
- Receiving the following error during RCF upgrade on BES-53248 cluster switch:
interface 0/17-0/24
An invalid interface range has been used for this function. An interface range must be 1000 characters or less.
no shutdown
Command not found / Incomplete command : no shutdown
Error! in configuration script file at line number 187.
CLI Command :: no shutdown.
Aborting script.
Execution of configuration script 'BES-53248-RCF-v1.12-Cluster-HA.scr' could not be completed.
WARNING:
The running configuration may not be the desired configuration. You might want to reload the saved configuration.- From the switch logs, both switches are only using two 10GbE ports: 0/1 & 0/2 and two 100GbE ports: 0/55 & 0/56:
*************** show port all ***************
Admin Physical Physical Link Link LACP Actor
Intf Type Mode Mode Status Status Trap Mode Timeout
--------- ------ --------- ---------- ---------- ------ ------- ------ --------
0/1 Enable 10G Full 10G Full Up Enable Enable long
0/2 Enable 10G Full 10G Full Up Enable Enable long
0/3 Enable Auto Down Enable Enable long
0/4 Enable Auto Down Enable Enable long
0/5 Enable Auto Down Enable Enable long
0/6 Enable Auto Down Enable Enable long
0/7 Enable Auto Down Enable Enable long
0/8 Enable Auto Down Enable Enable long
0/9 Enable Auto Down Enable Enable long
0/10 Enable Auto Down Enable Enable long
0/11 Enable Auto Down Enable Enable long
0/12 Enable Auto Down Enable Enable long
0/13 Enable Auto Down Enable Enable long
0/14 Enable Auto Down Enable Enable long
0/15 Enable Auto Down Enable Enable long
0/16 Enable Auto Down Enable Enable long
0/55 PC Mbr Enable Auto 100G Full Up Enable Enable long
0/56 PC Mbr Enable Auto 100G Full Up Enable Enable long