Skip to main content
NetApp Knowledge Base

Device PCI NTB for HA not detected on PCI BUS

  1. Last updated
  2. Save as PDF
Views:
403
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS2720
  • AFF A150

Issue

Node boot failed, run into loader prompt with PCIe device missing error:

LOADER-B> boot_ontap
---<<BOOT>>---
NetApp Data ONTAP 9.9.1

Device ("PCI NTB for HA" ) not detected on PCI BUS.
Device could be purposely held in reset or has developed a physical defect
or has a corrupt firmware.

Halting the system because the device is critical for normal operations.
Bootarg no-onboard-pcidev-check? can skip this check.
Halting...

BIOS Version: 11.11
Portions Copyright (C) 2014-2021 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...
...
BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.