"Command has been executed and the switch rebooted" message is observed on BES-53248 cluster switch
Applies to
- ONTAP 9
- BES-53248 cluster switches
Issue
- Seeing "command has been executed and the switch rebooted" message on both BES-53248 cluster switches:
BES-53248 Reference Configuration File v1.10 for Cluster/HA/RDMA
Switch : BES-53248
Filename : BES-53248-RCF-v1.10-Cluster-HA.txt
Date : 07-20-2023
Version : v1.10
Port Usage:
Ports 01 - 16: 10/25GbE Cluster Node Ports, base config
Ports 17 - 48: 10/25GbE Cluster Node Ports, with licenses
Ports 49 - 54: 40/100GbE Cluster Node Ports, with licenses, added right to left
Ports 55 - 56: 100GbE Cluster ISL Ports, base config
NOTE:
- The 48 SFP28/SFP+ ports are organized into 4-port groups in terms of port
speed:
Ports 1-4, 5-8, 9-12, 13-16, 17-20, 21-24, 25-28, 29-32, 33-36, 37-40, 41-44,
45-48
The port speed should be the same (10GbE or 25GbE) across all ports in a
4-port group
- If additional licenses are purchased, follow the 'Additional Node Ports
activated with Licenses' section for instructions
- If SSH is active, it will have to be re-enabled manually after 'erase
startup-config'
command has been executed and the switch rebooted
- System health alert example:
Node nodename
Monitor ethernet-switch
Alert ID ClusterIfIslDownWarn_Alert
Alerting Resource nodename/Slot: 0 Port: 56 100G - Level
Subsystem Switch-Health
Indication Time Sat May 10 10:10:36 2025
Perceived Severity Major