Skip to main content
NetApp Knowledge Base

Both nodes report SAS Expander has set the Chassis LED ON

  1. Last updated
  2. Save as PDF
Views:
15
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • FAS2750

Issue

  • System fault LED is amber on both nodes.
  • system controller service-event show report:
Node             ID  Event Location                      Event Description
---------------- --- ----------------------------------  ----------------------
FAS2750-01       1   Chassis 1                           SAS Expander has set the Chassis LED ON
FAS2750-02       1   Chassis 1                           SAS Expander has set the Chassis LED ON
  • One internal diks is missing
00.8 : NETAPP   X343_SSKBE1T8A10 NA03 1713.5GB 520B/sect (WBN5AF49)
00.9 : NETAPP   X343_TA15E1T8A10 NA00 1713.5GB 520B/sect (50S0A0CEF4UR)
00.10: NETAPP   X343_TA15E1T8A10 NA00 1713.5GB 520B/sect (50S0A0DQF4UR)
00.12: NETAPP   X343_TA15E1T8A10 NA00 1713.5GB 520B/sect (50S0A094F4UR)
00.13: NETAPP   X343_TA15E1T8A10 NA00 1713.5GB 520B/sect (50S0A06UF4UR)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.