Skip to main content
NetApp Knowledge Base

AFF fails to boot: Failed to get FRU data. Abort booting Ontap

  1. Last updated
  2. Save as PDF
Views:
234
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

AFF A400

Issue

  • The motherboard is re-seated from the chassis
  • Console output:
PEI start.
CPU PEI initialization.
Wait BMC 30 seconds.
Wait BMC self-test result.
BMC self-test: No Response.
UPI initialization.
CPU initialization.
Running full memory initialization.
CPU reset.
[m[2J[HBIOS Version: 16.8
PEI start.
CPU PEI initialization.
Wait BMC self-test result.
BMC self-test: Softfail.
UPI initialization.
CPU initialization.
Running full memory initialization.
DIMM F0: NVDIMM with valid data and restage progressing.....
DIMM F0: NVDIMM RESTAGE Success+++++++++
SPI FLASH: Primary BIOS
PEI end.
DXE start.
ERROR: Class:0; Subclass:20000; Operation: 1005
ERROR: Class:0; Subclass:20000; Operation: 1001
 
LOADER-B> boot_diags
ERROR: Failed to get FRU data. Abort booting Ontap.
Could not load fat://boot0/X86_64/freebsd/image1/bzImage: Error
*** command status = Error(-1)
 
LOADER-B> boot_ontap menu
ERROR: Failed to get FRU data. Abort booting Ontap.
ERROR: Error booting OS on: 'boot0' file: fat://boot0/X86_64/freebsd/image1/kernel (boot0,fat)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.