Skip to main content
NetApp Knowledge Base

IP interfaces not connecting after cluster switch upgrade from CN1610 to 3132Q

Views:
830
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • Cisco Nexus 3132Q
  • ONTAP 9

Issue

After applying the RCF file the ports used to connect the storage controller show the status Internal-Fail and status errDisable.

 

SWITCH01# show interface brief
 
--------------------------------------------------------------------------------
Port   VRF          Status IP Address                              Speed    MTU
--------------------------------------------------------------------------------
mgmt0  --           up     10.10.10.10                             1000     1500
 
--------------------------------------------------------------------------------
Ethernet      VLAN    Type Mode   Status  Reason                   Speed     Por
t
Interface                                                                    Ch 
#
--------------------------------------------------------------------------------
Eth1/1        1       eth  access down    XCVR not inserted          auto(D) --
....
Eth1/25/1     20      eth  access down    Internal-Fail errDisable   auto(D) --
Eth1/25/2     20      eth  access down    Administratively down      auto(D) --
Eth1/25/3     20      eth  access down    Administratively down      auto(D) --
Eth1/25/4     20      eth  access down    Administratively down      auto(D) --
Eth1/26/1     20      eth  access down    Internal-Fail errDisable   auto(D) --
Eth1/26/2     20      eth  access down    Administratively down      auto(D) --
Eth1/26/3     20      eth  access down    Administratively down      auto(D) --
Eth1/26/4     20      eth  access down    Administratively down      auto(D) --
Eth1/27/1     20      eth  access down    XCVR not inserted          auto(D) --

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.