Skip to main content
NetApp Knowledge Base

RCF install fails with error "Invalid range at '^' marker." on breakout ports

Views:
100
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • Cisco Nexus 9336C-FX2
  • Reference configuration file (RCF)

Issue

  • When installing RCF file NX9336C-FX2-RCF-v1.10-Shared.txt the port range e1/10/1-4 is not recognized.
  • Every command that follows fails with error % Invalid command at '^' marker.
 
`PR2-CS-SW2(config)# interface e1/1-8, e1/9/1-4, e1/10/1-4`
                                                   ^
Invalid range at '^' marker.
`PR2-CS-SW2(config)# inherit port-profile CLUSTER_HA`
                      ^
% Invalid command at '^' marker.
`PR2-CS-SW2(config)# priority-flow-control mode auto`
                                          ^
% Invalid command at '^' marker.
`PR2-CS-SW2(config)# service-policy type qos input HA_POLICY`
                           ^
% Invalid command at '^' marker.
`PR2-CS-SW2(config)# exit`
`PR2-CS-SW2# interface Ethernet 1/11-22`
                 ^
% Invalid command at '^' marker.
`PR2-CS-SW2# inherit port-profile STORAGE`
              ^
% Invalid command at '^' marker.
`PR2-CS-SW2# priority-flow-control mode on`
                                  ^
% Invalid command at '^' marker.
`PR2-CS-SW2# priority-flow-control watch-dog-interval on`
                                  ^
% Invalid command at '^' marker.
`PR2-CS-SW2# service-policy type qos input STORAGE_POLICY`
              ^
% Invalid command at '^' marker.
`PR2-CS-SW2# switchport vlan mapping 30 dot1q-tunnel 31`
                  ^
% Invalid command at '^' marker.
`PR2-CS-SW2# switchport trunk native vlan 33`
                  ^
% Invalid command at '^' marker.
`PR2-CS-SW2# switchport trunk allowed vlan 31,33`
                  ^
% Invalid command at '^' marker.
`PR2-CS-SW2# exit`
Copy complete, now saving to disk (please wait)...

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.