Brocade switch port offline with Persistently Disabled state (Area has been acquired)
Applies to
- All Brocade hardware platforms
- All Brocade fabric operating system (FOS) platforms
Issue
Portshow
of the affected port reportsPersistently Disabled
status:
portshow 145
portDisableReason: Area has been acquired
portCFlags: 0x0
portFlags: 0x4021 PRESENT U_PORT DISABLED LED
LocalSwcFlags: 0x0
portType: 26.0
portState: Persistently Disabled
Protocol: FC
portPhys: 5 No_Sync portScn: 2 Offline
port generation number: 262
state transition count: 29
- On a Brocade switch, the status may look like ths in the
switchshow
output:
Index Slot Port Address Media Speed State Proto
============================================================
145 7 17 029100 id N32 No_Sync FC Disabled (Persistent) (Area has been acquired)
sfpshow
reports Tx stat as -inf
=============
Slot 7/Port 17:
=============
Identifier: 3 SFP
Connector: 7 LC
Transceiver: 6804406000000000 8,16,32_Gbps M5 sw Inter,Short_dist
Encoding: 6 64B66B
[...]
Vendor Name: BROCADE
Vendor OUI: 00:05:1e
Vendor PN: 57-1000333-01
[...]
Temperature: 45 Centigrade
Current: 0.000 mAmps
Voltage: 3296.4 mVolts
RX Power: -3.4 dBm (454.0uW)
TX Power: -inf dBm (0.0 uW)
- Under
errdump
log, we could see below errors:
2022/09/26-19:00:53, [FABR-1034], 134131, SLOT 2 | FID 128, INFO, pun-brcx6-02, Area 145 have been acquired by port 7/16. Persistently disabling port 7/17.
2022/09/26-19:16:01, [FABR-1034], 134153, SLOT 2 | FID 128, INFO, pun-brcx6-02, Area 145 have been acquired by port 7/16. Persistently disabling port 7/17.
2022/09/26-19:43:54, [FABR-1034], 134155, SLOT 2 | FID 128, INFO, pun-brcx6-02, Area 145 have been acquired by port 7/16. Persistently disabling port 7/17.
2022/09/26-19:44:56, [FABR-1034], 134157, SLOT 2 | FID 128, INFO, pun-brcx6-02, Area 145 have been acquired by port 7/16. Persistently disabling port 7/17.
2022/09/26-19:54:26, [FABR-1034], 134159, SLOT 2 | FID 128, INFO, pun-brcx6-02, Area 145 have been acquired by port 7/16. Persistently disabling port 7/17.