Skip to main content
NetApp Knowledge Base

StorageGRID Appliance FC HBA fault detected - AutoSupport Message

  1. Last updated
  2. Save as PDF
Views:
15
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
not set
Last Updated:

Applies to

  • NetApp StorageGRID.
  • Software release 11.9 or newer.

Event Summary

StorageGRID Grid Manager reports the following alert: Appliance Fibre Channel HBA port failure - A Fibre Channel HBA port is failing or has failed.

Validate

Login to the StorageGRID Grid Manager, and confirm the "Appliance Fibre Channel HBA port failure" is present under Alerts section. 

Resolution

The solution might require a part replacement. Please contact NetApp Technical Support or log into the NetApp Support Site to create a case. Reference this article for further assistance.

 

Additional Information

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.