Skip to main content
NetApp Knowledge Base

Is it possible to change the Link Speed to Auto in StorageGRID SG5700 compute node?

  1. Last updated
  2. Save as PDF
Views:
65
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

Applies to

StorageGRID SG5700

Answer

No, we cannot change the Link Speed to AUTO as there is only two options available in SG5700 compute node.

clipboard_ee99aa9a00d30d9bba1eb89c771aa4bc9.png

Additional Information

Change link configuration of E5700SG controller

About this task

Options for changing the Ethernet link configuration of the E5700SG controller include:

  • Changing Port bond mode from Fixed to Aggregate, or from Aggregate to Fixed

  • Changing Network bond mode from Active-Backup to LACP, or from LACP to Active-Backup

  • Enabling or disabling VLAN tagging, or changing the value of a VLAN tag

  • Changing the link speed from 10-GbE to 25-GbE, or from 25-GbE to 10-GbE

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.