Search

Easy Scale fails when vmnics are not set to Active in fail-over configuration on existing ESXi host
https://kb.netapp.com/Legacy/NetApp_HCI/OS/Easy_Scale_fails_when_vmnics_are_not_set_to_Active_in_fail-over_configuration_on_existing_ESXi_host
Applies to NetApp HCI NetApp Deployment Engine (NDE) VMware vSphere virtual switch (vSwitch) Issue NDE Easy Scale operation fails at "Connect to vCenter" step as per below:
Uplinks flapping on H300E
https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/Uplinks_flapping_on_H300E
<NMLX_INF> nmlx5_core: vmnic4: nmlx5_en_UplinkQGetStats - (vmkdrivers/native/BSD/Network/mlnx/nmlx5/nmlx5_core/nmlx5_core_en_multiq.c:1777) not supported <NMLX_INF> nmlx5_core: vmnic5: nmlx5_en_Uplink...<NMLX_INF> nmlx5_core: vmnic4: nmlx5_en_UplinkQGetStats - (vmkdrivers/native/BSD/Network/mlnx/nmlx5/nmlx5_core/nmlx5_core_en_multiq.c:1777) not supported <NMLX_INF> nmlx5_core: vmnic5: nmlx5_en_UplinkQGetStats - (vmkdrivers/native/BSD/Network/mlnx/nmlx5/nmlx5_core/nmlx5_core_en_multiq.c:1777) not supported cpu11:2102461)WARNING: cswitch: VLAN_PortGetVLANData:397: [nsx@6876 comp="nsx-esx" subcomp="vswitch"]No vlan data for non dvs ports or ports without port group 0x2000001