Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/What_is_a_system_power_cycle_and_how_to_use_it
      A system power cycle is a way to reboot the controller from the SP/BMC which will initiate a dirty shutdown of the node After the power cycle is performed, run the system console command to watch the ...A system power cycle is a way to reboot the controller from the SP/BMC which will initiate a dirty shutdown of the node After the power cycle is performed, run the system console command to watch the system boot up This is not the most appropriate way to reboot the controller and is a last resort to try to recover an unresponsive node remotely without physical intervention Verify how the system boots up by running the 'system console' command: