Applies to ONTAP 9.5+ SnapMirror Synchronous Issue The SnapMirror Synchronous snapshots are not deleted on the source SnapMirror Synchronous updates with no issues, snapshots are rotated on destinatio...Applies to ONTAP 9.5+ SnapMirror Synchronous Issue The SnapMirror Synchronous snapshots are not deleted on the source SnapMirror Synchronous updates with no issues, snapshots are rotated on destination as designed In addition Veeam creates snapshots for backup on the source volume
Applies to ONTAP Select Reboot SYNCMIRROR PLEX FAILED Issue SYNCMIRROR PLEX FAILED health error appears in case of one of the Select nodes experience a reboot due to a failover/outage.
A mirrored aggregate can run out of space if the SyncMirror is in a degraded state and the aggregate is near capacity. RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --...A mirrored aggregate can run out of space if the SyncMirror is in a degraded state and the aggregate is near capacity. RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --------- ------ ------------- ---- ---- ---- ----- -------------- -------------- dparity FAILED N/A 3807816/ - parity FAILED N/A 3807816/ - data FAILED N/A 3807816/ - Raid group is missing 3 disks.
Applies to MetroCluster ONTAP 9 ONTAP 8 SyncMirror degraded Description Mirror degraded indicates that an aggregate that was configured as a mirrored aggregate is not mirrored any more. This article d...Applies to MetroCluster ONTAP 9 ONTAP 8 SyncMirror degraded Description Mirror degraded indicates that an aggregate that was configured as a mirrored aggregate is not mirrored any more. This article describes the procedure to be followed to fix a mirror degraded system.
Applies to SyncMirror MetroCluster Description This article describes how to convert mirrored aggregate to a common aggregate when it is no longer needed.
Applies to SyncMirror ONTAP 9.3+ Cloud Volumes ONTAP(CVO) on Amazon Web Services (AWS) ONTAP Select Description In certain circumstances, the default speed for resyncing a syncmirror plex might not be...Applies to SyncMirror ONTAP 9.3+ Cloud Volumes ONTAP(CVO) on Amazon Web Services (AWS) ONTAP Select Description In certain circumstances, the default speed for resyncing a syncmirror plex might not be fast enough to complete within a maintenance window using the default settings.
Applies to SyncMirror FlashPool MetroCluster ONTAP 9.2 and later SSD space lower than 1% Issue There is no space left on aggregate with Flashpool configured: Fri Feb 7 09:10:11 CET [node1:raid.mirror....Applies to SyncMirror FlashPool MetroCluster ONTAP 9.2 and later SSD space lower than 1% Issue There is no space left on aggregate with Flashpool configured: Fri Feb 7 09:10:11 CET [node1:raid.mirror.resync.snapcrtfail:warning]: Aggregate aggr1: could not create mirror resynchronization snapshot mirror_resync. (No space left on device)
Applies to ONTAP 8.2.5 7-Mode Syncmirror Issue Synchronous snapmirror was not immediately synced after a reverse resync operation For example, a snapmirror resync issued during a DR test or actual DR ...Applies to ONTAP 8.2.5 7-Mode Syncmirror Issue Synchronous snapmirror was not immediately synced after a reverse resync operation For example, a snapmirror resync issued during a DR test or actual DR event may take longer than expected to reach an In-Sync state
Applies to ONTAP Select SyncMirror Issue After manually assigning disks to increase the size of an mirrored aggregate, BadPoolAssign alerts are seen on each Takeover/Giveback.
Applies to NetApp ONTAP Select (OTS) NetApp ONTAP Deploy VMWare ESXi VMWare vCenter VMWare vSphere Issue Takeover initiated by another node with the indicated ASUP alert: HA Group Notification from <n...Applies to NetApp ONTAP Select (OTS) NetApp ONTAP Deploy VMWare ESXi VMWare vCenter VMWare vSphere Issue Takeover initiated by another node with the indicated ASUP alert: HA Group Notification from <node_name> (SYNCMIRROR PLEX FAILED) ALERT
