Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Adding_a_second_NS224_shelf_changes_first_shelf_ID_to_the_serial_number
      Adding a second NS224 shelf to an existing stack, boots “slow”, showing the wrong ID 0 first and some unreadable characters later. After some minutes, the added shelf NS224 shows the correct shelf ID ...Adding a second NS224 shelf to an existing stack, boots “slow”, showing the wrong ID 0 first and some unreadable characters later. After some minutes, the added shelf NS224 shows the correct shelf ID 1. The "storage shelf show" output for the previous existing shelf with the ID 0, changes the name from "1.0" to the s/n "1.SHFHUXXXXXXXXXX". Shelf Name Shelf ID Serial Number Model Type Status At the node level CLI, just one node reports the "wrong" shelf ID:
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Can_the_shelf_ID_of_a_FAS500f_or_AFF_A250_be_changed
      Applies to FAS500f AFF A250 Answer No, the shelf ID for a FAS500f or AFF A250 controller is set to 0 and cannot be changed. Additional Information additionalInformation_text