Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • https://kb.netapp.com/Legacy/ONTAP/7Mode/What_are_the_methods_of_perfstat_collection_for_Data_ONTAP_7_mode
      See also: What are the methods of perfstat collection for ONTAP 9? Perfstat 8 is for ONTAP 9 only, all Data ONTAP 7-Mode systems should use Perfstat 7 Collection host should be on the same network as ...See also: What are the methods of perfstat collection for ONTAP 9? Perfstat 8 is for ONTAP 9 only, all Data ONTAP 7-Mode systems should use Perfstat 7 Collection host should be on the same network as the cluster, avoid a lot of network hops or latency between host and cluster. The perfstat application and related output files should only be stored on the local disk of the collection host. How to use passwordless SSH to collect a perfstat on a Linux/UNIX host​ (Data ONTAP 7-Mode)
    • https://kb.netapp.com/on-prem/ontap/Perf/Perf-KBs/How_to_collect_a_Perfstat7_on_Windows_7_or_Server_2008_or_newer_via_GUI
      Applies to Windows 7 to 10 Windows Server 2008 to 2019 or newer SSH must be used to collect Perfstats from Windows 7, Server 2008, and newer. The latest Data ONTAP 7-Mode version of Perfstat can be lo...Applies to Windows 7 to 10 Windows Server 2008 to 2019 or newer SSH must be used to collect Perfstats from Windows 7, Server 2008, and newer. The latest Data ONTAP 7-Mode version of Perfstat can be located here. Perfstat only collects data from the time it is running. Therefore, run the perfstat data collector during a time the problem is perceived, unless otherwise instructed by NetApp support. If you wish to use the CLI, please see our article on collecting perfstat7 from the CLI for Windows.
    • https://kb.netapp.com/Legacy/OnCommand_Suite/How_to_trigger_a_7-mode_perfstat_through_OnCommand_Unified_Manager_5.x
      Performance Advisor is part of OnCommand Unified Manager (DFM) and essentially connects to the Counter Manager in Data ONTAP on a periodic basis, stores those samples on the OnCommand Unified Manager ...Performance Advisor is part of OnCommand Unified Manager (DFM) and essentially connects to the Counter Manager in Data ONTAP on a periodic basis, stores those samples on the OnCommand Unified Manager server, and can be configured for multiple controllers. When Performance Advisor is configured, it is constantly running in the background; Perfstat on the other hand will give very detailed information on the performance aspects of Data ONTAP.