Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • https://kb.netapp.com/Legacy/NetApp_HCI/OS/How_to_send_vCenter_data_to_Active_IQ_in_large_compute_environments
      Large compute environment: over 180 compute nodes Not limited to HCI systems only This article explains how to send the compute/vCenter telemetry for large-scale compute environments. By default the t...Large compute environment: over 180 compute nodes Not limited to HCI systems only This article explains how to send the compute/vCenter telemetry for large-scale compute environments. By default the timeout for pulling telemetry from the vCenter onto the mNode is set to 60 seconds. For large environments it can take more than 60 seconds transferring the larger payload. As such the data will not be sent to or appear in Active IQ. """Default timeout for AIQ API requests in seconds"""
    • https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/How_to_remove_VM_names_from_Active_IQ
      Applies to NetApp Element software NetApp SolidFire Active IQ Management Node (mNode) 11.3 and higher Management services up to 2.19 Description This article describes if it is possible to remove/hide...Applies to NetApp Element software NetApp SolidFire Active IQ Management Node (mNode) 11.3 and higher Management services up to 2.19 Description This article describes if it is possible to remove/hide VM names in Active IQ