Applies to MetroCluster FC System configured with 8 paths to each disk per node due to ATTOs using both FC ports and switches using single FC port zoning. Each node in the MetroCluster configuration c...Applies to MetroCluster FC System configured with 8 paths to each disk per node due to ATTOs using both FC ports and switches using single FC port zoning. Each node in the MetroCluster configuration can only support a maximum of 4 paths to disks. ONTAP 9.7 and later ClusterA::> storage show disk -fields path-count -type !LUN ONTAP 9.6 and earlier ClusterA::> storage show disk -fields initiator -nodelist <nodename> -type !LUN disk initiator 1.11.0 3c,3d,3a,3b 1.11.1 3c,3d,3a,3b 1.11.2 3c,3d,3a,3b
The transitioning state should only be seen briefly during a takeover or giveback as the path transitions from one active state to another. May 30 00:39:07 hdisk1 P SC_DISK_ERR2 path 0 TEST UNIT READY...The transitioning state should only be seen briefly during a takeover or giveback as the path transitions from one active state to another. May 30 00:39:07 hdisk1 P SC_DISK_ERR2 path 0 TEST UNIT READY CHECK NOT READY; LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION May 30 00:38:53 hdisk0 P SC_DISK_ERR2 path 10 TEST UNIT READY CHECK NOT READY; LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION
