Incorrect disk size 9324.2GB is seen in sysconfig -a output after a replacement. Disk automatically partitions and the P2 root partition assimilates into a RAID group or becomes spare because it has t...Incorrect disk size 9324.2GB is seen in sysconfig -a output after a replacement. Disk automatically partitions and the P2 root partition assimilates into a RAID group or becomes spare because it has the expected size. The remaining data or spare P1 partition size is not valid for the other RAID group because it is smaller than expected. RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
Applies to Data ONTAP 8.3 ONTAP 9 Disk Qualification Package (DQP) Issue Manual execution of disk partition command from the node shell fails with "is not partitionable" error cluster1-01*> disk parti...Applies to Data ONTAP 8.3 ONTAP 9 Disk Qualification Package (DQP) Issue Manual execution of disk partition command from the node shell fails with "is not partitionable" error cluster1-01*> disk partition -n 2 -i 1 -b ****** 0a.00.4 disk partition: 0a.00.4 is not partitionable. In the "storage disk" section of ASUP, "Dynamically qualified:" is set to "Yes". Disk: 0a.00.10 Shelf: 0 Bay: 10 Serial: XXXXXXXXXXXX Vendor: NETAPP Model: X423_XXXXXXXX Dynamically qualified: Yes
Applies to NetApp Cloud Manager (Connector) Microsoft Azure (AZ) Amazon Web Services (AWS) Google Cloud Platform (GCP) Description To keep up with changes to the connector storage requirements, it is ...Applies to NetApp Cloud Manager (Connector) Microsoft Azure (AZ) Amazon Web Services (AWS) Google Cloud Platform (GCP) Description To keep up with changes to the connector storage requirements, it is required to increase the disk and partition size.
While preparing to upgrade Active IQ Unified Manager, MySQL does not start after upgrading to 8.0.x from 5.7.x 2021-03-05T13:37:39.312248Z 2 [ERROR] [MY-010758] [Server] Error in creating TABLE_SHARE ...While preparing to upgrade Active IQ Unified Manager, MySQL does not start after upgrading to 8.0.x from 5.7.x 2021-03-05T13:37:39.312248Z 2 [ERROR] [MY-010758] [Server] Error in creating TABLE_SHARE from sample_current_vserver.frm file. 2021-03-05T13:37:39.313399Z 2 [ERROR] [MY-010758] [Server] Error in creating TABLE_SHARE from sample_current_volume.frm file.
Applies to Systems using partitioned disks/SSD's ADPv1 or ADPv2 Aggregate expansion Description When adding non-partitioned spare disks to a partitioned aggregate as a new RAID group, the non-partitio...Applies to Systems using partitioned disks/SSD's ADPv1 or ADPv2 Aggregate expansion Description When adding non-partitioned spare disks to a partitioned aggregate as a new RAID group, the non-partitioned spares are not automatically getting partitioned as expected in the new RAID group Follow the steps provided to partition 1 non-partitioned spare , first This will allow you to add the remaining non-partitioned spares
It is possible to partition the drives manually, however the procedure is available for recovery purposes and is not supported on new shelves or disks deployment. Disk drives have to be owned - more i...It is possible to partition the drives manually, however the procedure is available for recovery purposes and is not supported on new shelves or disks deployment. Disk drives have to be owned - more information and commands available in ONTAP 9 Documentation Center - Assign ownership of a disk to a system If manual partitioning of a disk is required, please contact NetApp Technical Support for assistance and reference this article.
