Applies to ONTAP 9 Load-sharing mirror Issue volume move command against a load-sharing destination volume fails ::> volume move start -volume <LOAD-SHARING DESTINATION VOLUME> -destination-aggregate ...Applies to ONTAP 9 Load-sharing mirror Issue volume move command against a load-sharing destination volume fails ::> volume move start -volume <LOAD-SHARING DESTINATION VOLUME> -destination-aggregate <AGGREGATE> Error: command failed: You cannot move a load-sharing destination volume. Instead, create a new load-sharing destination volume in the correct location. Then delete the load-sharing destination volume that you attempted to move.
Ignoring and trying next available source [ 6] Successfully connected to ip 11.16.97.32, port 88 using TCP [ 23] Successfully connected to ip 11.16.97.32, port 636 using TCP [ 35] Successful...Ignoring and trying next available source [ 6] Successfully connected to ip 11.16.97.32, port 88 using TCP [ 23] Successfully connected to ip 11.16.97.32, port 636 using TCP [ 35] Successfully connected to ip 11.16.97.32, port 88 using TCP **[ 41] FAILURE: LDAP query for Group ID (schema attribute: 'gidNumber') associated with UNIX User 'first.last' returned out of range numeric value '-2147483648' [ 42] Failed to get user info for id '123' [ 42] Entry for user-id: 123 not fo…
Applies to ONTAP 9 Issue When performing an LS on a volume the following error is observed NOTE: This is a nodeshell command cluster-01> priv set diag Warning: These diagnostic commands are for use by...Applies to ONTAP 9 Issue When performing an LS on a volume the following error is observed NOTE: This is a nodeshell command cluster-01> priv set diag Warning: These diagnostic commands are for use by NetApp personnel only. cluster-01*> ls -l /vol/NAS_vol1 /vol/NAS_vol1: Can't open directory: Undefined error: 265
