Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • https://kb.netapp.com/on-prem/ontap/Perf/Perf-KBs/Backup_jobs_via_CIFS_are_slow_while_doing_indirect_access
      Applies to FAS 2XXX Backups done via CIFS Volumes being accessed indirectly (through LIF from partner node) Considerable increase of workload Issue Backups are running slow hence taking longer to comp...Applies to FAS 2XXX Backups done via CIFS Volumes being accessed indirectly (through LIF from partner node) Considerable increase of workload Issue Backups are running slow hence taking longer to complete.
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/How_to_modify_LIFs_without_disrupting_IO_traffic
      Applies to ONTAP 9 iSCSI Answer A LIF has to be brought down in order to modify it. Make sure the host has access to multiple paths so that bringing down one LIF will not cause any IO disruption. Addi...Applies to ONTAP 9 iSCSI Answer A LIF has to be brought down in order to modify it. Make sure the host has access to multiple paths so that bringing down one LIF will not cause any IO disruption. Additional Information Modifying a LIF
    • https://kb.netapp.com/on-prem/ontap/DP/SnapMirror/SnapMirror-KBs/Storage_Virtual_Machines_DR__stop_after_a_cluster_reboot_or_an_unplanned_power_outage
      Storage Virtual Machines (SVMs) are stopped after all nodes in an SVM-DR are rebooted for any of the following: Attempting to start the Vservers result in the following error: Error: command failed: F...Storage Virtual Machines (SVMs) are stopped after all nodes in an SVM-DR are rebooted for any of the following: Attempting to start the Vservers result in the following error: Error: command failed: Failed to start Vserver "vserver1" because the management configuration for this Vserver is locked. Attempting to modify any configuration within a Vserver results in the following error: the management configuration for the Vserver "vserver1" is locked.