Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 32 results
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/32G_QSFP_fails_to_come_online_after_port_bounce_as_per_TSB_2018_273_A
      Applies to Brocade Switch X6 Brocade switch G620 FOS 8.1.2b Issue The 32G QSFP with break-out capability (P/N 57-1000351-XX) may fail to return to an online state or may remain as “In-Sync” or “No-Syn...Applies to Brocade Switch X6 Brocade switch G620 FOS 8.1.2b Issue The 32G QSFP with break-out capability (P/N 57-1000351-XX) may fail to return to an online state or may remain as “In-Sync” or “No-Sync” state on a switch or director with FOS 8.1.2b installed.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Switch_missing_from_fabric_but_reachable_via_management_IP
      Applies to Brocade G630 fabric switch Issue Brocade switch went missing from fabric but is reachable via management IP The errdump logs show lines similar to the following: 2020/04/08-14:26:03, [C4-10...Applies to Brocade G630 fabric switch Issue Brocade switch went missing from fabric but is reachable via management IP The errdump logs show lines similar to the following: 2020/04/08-14:26:03, [C4-1011], 9553, CHASSIS, WARNING, BrocadeG630, Detected a complete loss of credit on internal back-end VC: Slot 0, Port -1(86) vc_no=30 crd(s)lost=45. 2020/04/08-14:26:03, [C4-1014], 9554, CHASSIS, WARNING, BrocadeG630, Link Reset on Port S0,P-1(86) vc_no=30 crd(s)lost=45 auto trigger.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/How_to_reset_password_on_Brocade_X6-8_and_X6-4_Director_class_switches
      Applies to Brocade X6-8 and X6-4 Directors Description Customer does not have root or admin credentials to login to second switch for data collection. End user could not remember / misplaced login cre...Applies to Brocade X6-8 and X6-4 Directors Description Customer does not have root or admin credentials to login to second switch for data collection. End user could not remember / misplaced login credentials.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Res_Guide__Latency_reported_on_ESXi_hosts_connected_to_Brocade_switch
      2022/06/27-17:30:33, [MAPS-1003], 201440, SLOT 2 | FID 128, WARNING, Sify_X6_102_FAB2, Flow (SID=0x661658,DID=0x68a0c0,Host Port=4/6), Condition=sys_flow_monitor(RD_STATUS_TIME/10SEC>12000), Current V...2022/06/27-17:30:33, [MAPS-1003], 201440, SLOT 2 | FID 128, WARNING, Sify_X6_102_FAB2, Flow (SID=0x661658,DID=0x68a0c0,Host Port=4/6), Condition=sys_flow_monitor(RD_STATUS_TIME/10SEC>12000), Current Value:[RD_STATUS_TIME, 14832 Microseconds], RuleName=defRD_STATUS_TIME_12000, Dashboard Category=IO Latency.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Brocade_Switch_Troubleshooting_Workflow
      This workflow allows you to troubleshoot issues related to brocade switches. You can troubleshoot hardware and software issues related to brocade using this workflow. You can also find important techn...This workflow allows you to troubleshoot issues related to brocade switches. You can troubleshoot hardware and software issues related to brocade using this workflow. You can also find important technical support bulletins listed here.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/How_POD_is_enabled_on_Brocade_switches
      The article explains how POD is enabled on Brocade switches and gives detailed information on Brocade POD.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Resolution_Guide__PCS_error_reported_on_Brocade_switch_ports
      Physical Coding Sublayer errors reported on Brocade switch ports
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/How_to_capture_a_TCPdump_on_a_Brocade_switch
      Applies to All Brocade Fiber Channel switch platforms All Brocade Fabric OS versions Description This procedure describes how to capture a TCPdump on a Brocade switch for analysis.
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/SFP_Resolution_guide
      This KB contains troubleshooting and how to KBs for SFP issues. As per the information you are looking for, click on the KB link within the tables.
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/LUN_not_visible_in_a_lun_show_command_output
      LUN not visible in lun show, however, it is visible on a full path. LUN is also not visible in Autosupport. debug smdb table d_vdisk_lun show shows LUN type correctly, however, vdom dump -metafile vto...LUN not visible in lun show, however, it is visible on a full path. LUN is also not visible in Autosupport. debug smdb table d_vdisk_lun show shows LUN type correctly, however, vdom dump -metafile vtoc shows namespace and flag is not 0: ::*> debug smdb table d_vdisk_lun show -node NETAPP -dsid 5846 -type-filter all -fields type node dsid snapshot qtree lun type NETAPP 5846 "" "" test_lun.lun lun ::*> node run -node * -command vdom dump -metafile vtoc -d 5846 -h
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Brocade_Switch_Port_is_offline_with_No_Light_state
      The article shows why Brocade switch Port is offline with No_Light state and provides the solution.