The lifs and physical ports are up and online on NetApp end, the same can be verified using fcp adapter show and net int show command. Some of the ESXi host initiators are not logged in to all the tar...The lifs and physical ports are up and online on NetApp end, the same can be verified using fcp adapter show and net int show command. Some of the ESXi host initiators are not logged in to all the target LIF. fcp initiator.xml log shows the host not logged in using the lifs of all the nodes of the cluster. Toggle the switch port connected to host initiator and verify, This can be done using portdisable command on Brocade switch and shutdown command on Cisco switch.
Applies to SnapCenter Plug-In for SQL (SCSQL) 4.1 SnapCenter Plug-In for Windows (SCW) 4.1 Snapcenter Plug-In for VMWare (SCV) VMWare vCenter Server (VC) Issue SCSQL verification fails on one of the p...Applies to SnapCenter Plug-In for SQL (SCSQL) 4.1 SnapCenter Plug-In for Windows (SCW) 4.1 Snapcenter Plug-In for VMWare (SCV) VMWare vCenter Server (VC) Issue SCSQL verification fails on one of the plugin hosts with the following error in the SCW log: [...] Initiator <iqn_name> is not logged in on <svm_name> [...] None of the host initiators <iqn_name> are logged into the controller. Resolution: Please make sure the supplied inititators are logged in.
Applies to NetApp AFF-A300 ONTAP 9.7 MetroCluster setup Brocade Fibre Channel (FC) SAN switches Issue After performing MetroCluster switchover or switchback, FCP sessions of host initiators are not es...Applies to NetApp AFF-A300 ONTAP 9.7 MetroCluster setup Brocade Fibre Channel (FC) SAN switches Issue After performing MetroCluster switchover or switchback, FCP sessions of host initiators are not established although initiators are reachable from the LIFs Initiator sessions are reestablished after disabling and reenabling zoning on the Brocade switches
