Applies to ONTAP 9 Description CIFS authentication fails and indicates that the domain controllers are not responding The following document is designed to assist you finding a solution based on what ...Applies to ONTAP 9 Description CIFS authentication fails and indicates that the domain controllers are not responding The following document is designed to assist you finding a solution based on what condition you are meeting
The following is reported in the Active IQ Error Log or Element UI Alerts: The SolidFire Application cannot communicate with node ID X. After attempting to reboot/power cycle the node, it does not boo...The following is reported in the Active IQ Error Log or Element UI Alerts: The SolidFire Application cannot communicate with node ID X. After attempting to reboot/power cycle the node, it does not boot to Element and the following errors are observed during POST: No boot device available or Operating System detected. Current boot mode is set to BIOS Please ensure compatible bootable media is available. Use the system setup program to change the boot mode as needed.
Downloading a new ONTAP image or firmware file fails once a node boots up ONTAP, however it works as expected when downloading from the HTTP server at the LOADER prompt (prior to booting ONTAP on the ...Downloading a new ONTAP image or firmware file fails once a node boots up ONTAP, however it works as expected when downloading from the HTTP server at the LOADER prompt (prior to booting ONTAP on the node) NetApp Data ONTAP 9.5P12 <<<---ONTAP is booting here This procedure will replace existing Data ONTAP software with new software. What is the URL for the package? Verify that the network is properly configured, that the gateway is set
UNIX user from NFS client cannot access data on NTFS security style volume [?] Tue Jul 14 15:03:34 CEST [node-01: secd: secd.nfsAuth.noNameMap:error]:vserver (SVM) Cannot map UNIX name to CIFS name.Er...UNIX user from NFS client cannot access data on NTFS security style volume [?] Tue Jul 14 15:03:34 CEST [node-01: secd: secd.nfsAuth.noNameMap:error]:vserver (SVM) Cannot map UNIX name to CIFS name.Error: Get user credentials procedure failed [ 0] Trying to map 'test' to Windows user 'test' using implicit mapping **[ 11] FAILURE: Name mapping for UNIX user 'test' failed. Name mapping configuration shows that explicit mapping is defined for the same user
When installing DWH for Windows, the install process gets stuck at the "Starting Reporting Engine" step. After some time the installation fails with an error: There is a problem with this Windows Inst...When installing DWH for Windows, the install process gets stuck at the "Starting Reporting Engine" step. After some time the installation fails with an error: There is a problem with this Windows Installer package. Using Windows Event Viewer to review the Security Event logs reveals an error with Security Event ID 4625. This is an authentication error that reports "Failure Reason: The user has not been granted the requested logon type at this machine."
