Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • Attention LED on a shelf DS460C after drawer replacement with no issues
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Attention_LED_on_a_shelf_DS460C_after_drawer_replacement_with_no_issues
      Drawers Control Module: Element Status Status Bytes Status Descriptions 1 [IOM12 A] : OK 01,00,01,00 REPORT 2 [IOM12 A] : OK 01,00,01,00 REPORT 3 [IOM12 A] : CRITICAL 02,40,00,00 FAIL 4 [IOM12 A] : OK...Drawers Control Module: Element Status Status Bytes Status Descriptions 1 [IOM12 A] : OK 01,00,01,00 REPORT 2 [IOM12 A] : OK 01,00,01,00 REPORT 3 [IOM12 A] : CRITICAL 02,40,00,00 FAIL 4 [IOM12 A] : OK 01,00,01,00 REPORT 5 [IOM12 A] : OK 01,00,01,00 REPORT 6 [IOM12 B] : OK 01,00,01,00 REPORT 7 [IOM12 B] : OK 01,00,01,00 REPORT 8 [IOM12 B] : OK 01,40,01,00 FAIL, REPORT 9 [IOM12 B] : OK 01,00,01,00 REPORT 10 [IOM12 B] : OK 01,00,01,00 REPORT
    • Arranging disks in a non fully-populated DS460C shelf after receiving ses.shelf.drawer.min.drives:info EMS message
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Arranging_disks_in_a_non_fully_populated_DS460C_shelf_after_receiving_ses_shelf_drawer_min_drives_info_EMS_message
      [dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay 0 missing, drawer needs first 4 drives installed. [dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay ...[dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay 0 missing, drawer needs first 4 drives installed. [dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay 3 missing, drawer needs first 4 drives installed. [dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay 6 missing, drawer needs first 4 drives installed. [dsa_disc: ses.shelf.drawer.min.drives:info]: Disk shelf 11, drawer 5, bay 9 missing, drawer needs first 4 drives installed.
    • E-series all 12 disk drives are Loss of redundancy status in one Drawer
      https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E-series_all_disk_drives_are_Loss_of_redundancy_status_in_one_Drawer
      The recovery-guru-procedures shows "Failure Entry: NO_REDUNDANCY_DRIVE-Recovery Failure Type Code: 32" on all 12 disk drives of the affected Drawer. In the ASUP STORAGE-ARRAY-PROFILE Section the DRIVE...The recovery-guru-procedures shows "Failure Entry: NO_REDUNDANCY_DRIVE-Recovery Failure Type Code: 32" on all 12 disk drives of the affected Drawer. In the ASUP STORAGE-ARRAY-PROFILE Section the DRIVES summary output shows all 12 disk drives in the same drawer in a Loss of redundancy status. In the example below we can see all of the drives in Tray 1 Drawer 4 are using the same preferred channel, and none of the drives have a redundant channel (path).
    • DS460C Drawers Control Module DCM fault
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/DS460C_Drawers_Control_Module_DCM_fault
      This article provides a solution for addressing the Drawer Control Module (DCM) fault in the DS460C disk shelf.