Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • Cisco switch does not boot after relocation and installation at a different location
      https://kb.netapp.com/on-prem/Switches/Cisco-KBs/Cisco_switch_does_not_boot_after_relocation_and_installation_at_a_different_location
      Applies to Cisco switch Issue Cisco switch will not boot after relocation and installation at a different location.
    • "No boot device available or Operating System detected" while attempting to boot SolidFire/HCI Node
      https://kb.netapp.com/on-prem/solidfire/Element_OS_Kbs/No_boot_device_available_or_Operating_System_detected_while_attempting_to_boot_SolidFire_or_HCI_Node
      The following is reported in the Active IQ Error Log or Element UI Alerts: The SolidFire Application cannot communicate with node ID X. After attempting to reboot/power cycle the node, it does not boo...The following is reported in the Active IQ Error Log or Element UI Alerts: The SolidFire Application cannot communicate with node ID X. After attempting to reboot/power cycle the node, it does not boot to Element and the following errors are observed during POST: No boot device available or Operating System detected. Current boot mode is set to BIOS Please ensure compatible bootable media is available. Use the system setup program to change the boot mode as needed.