Applies to E-Series Issue The following error message is returned when a user attempts to create a new disk pool in SANtricity: The import operation cannot complete because a valid key has not been se...Applies to E-Series Issue The following error message is returned when a user attempts to create a new disk pool in SANtricity: The import operation cannot complete because a valid key has not been set on the target storage array
Number of drives reserved by default for preservation capacity when creating a Disk Pool in SANtricity: Disk Pool Drive Count Default Number of Drives Reserved for Preservation Capacity Table can be u...Number of drives reserved by default for preservation capacity when creating a Disk Pool in SANtricity: Disk Pool Drive Count Default Number of Drives Reserved for Preservation Capacity Table can be used to determine number of drives required for preservation capacity for new disk pools or adding/removing drives to an existing disk pool The number of drives assigned for preservation capacity will depend on user comfort level with amount of failures the disk pool can sustain before failing
Applies to Any Version prior to: NetApp SANtricity OS 8.40.60.01 NetApp SANtricity OS 11.50.3 Issue Failed drive was replaced, the drive shows optimal however disk pool shows degraded and reporting th...Applies to Any Version prior to: NetApp SANtricity OS 8.40.60.01 NetApp SANtricity OS 11.50.3 Issue Failed drive was replaced, the drive shows optimal however disk pool shows degraded and reporting the drive as failed