Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 7 results
    • Configuring the admin network on the Primary admin node which is a VM
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/Configuring_the_admin_network_on_the_Primary_admin_node_which_is_a_VM
      Applies to StorageGRID Issue Adding the admin network (eth1) to an existing node.
    • StorageGRID IP Address can not be changed by change-ip tool
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/StorageGRID_IP_Address_can_not_be_changed_by_change-ip_tool
      Applies to NetApp StorageGRID 11.2 Issue StorageGRID IP Change tool (change-ip) shows no options except APPLY changes and Exit: 1: APPLY changes to the grid 0: Exit
    • Change-ip tool stuck after manually restarting nodes
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/Change-ip_tool_stuck_after_manually_restarting_nodes
      Applies to NetApp StorageGRID Issue After changing the IP addresses via the change-ip tool, the change-ip tool script is stuck on the apply section with message: ERROR: execution expired Enter a to ab...Applies to NetApp StorageGRID Issue After changing the IP addresses via the change-ip tool, the change-ip tool script is stuck on the apply section with message: ERROR: execution expired Enter a to abort, c to continue, r to retry [a/c/r]> c Restarting node <node name>... FAILED. ERROR: Failed to open TCP connection to <ip address port> (No route to host - connect(2) for "<ip address>" port <port>)
    • change-ip tool shows error  Continuing previously started IP change procedure
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/change-ip_tool_shows_error__Continuing_previously_started_IP_change_procedure
      Applies to StorageGRID Issue Getting the following error when trying to change IP with the tool in StorageGRID: Welcome to the StorageGRID IP Change Tool. Note: Continuing previously started IP change...Applies to StorageGRID Issue Getting the following error when trying to change IP with the tool in StorageGRID: Welcome to the StorageGRID IP Change Tool. Note: Continuing previously started IP change procedure. 1: APPLY changes to the grid 0: Exit Selection:
    • StorageGRID when change-ip tool does not work in changing the IP address
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/StorageGRID_when_change-ip_tool_does_not_work_in_changing_the_IP_address
      Applies to NetApp StorageGRID 11.x Issue Unable to change network options for a StorageGRID node using the change-ip tool.
    • NTP service not starting after using change-ip to add static routes
      https://kb.netapp.com/hybrid/StorageGRID/Services/NTP_service_not_starting_after_using_change-ip_to_add_static_routes
      Applies to NetApp StorageGRID Issue After using the change-ip to add static routes to the Primary Admin node for NTP traffic, the NTP service is no longer starting on any of the Nodes
    • StorageGRID Appliance shows MTU mismatch error when upgraded from 11.4.x to 11.5
      https://kb.netapp.com/hybrid/StorageGRID/Platforms/StorageGRID_Appliance_shows_MTU_mismatch_error_when_upgraded_from_11.4.x_to_11.5
      Applies to NetApp StorageGRID 11.5 NetApp StorageGRID Appliance SG57xx NetApp StorageGRID Appliance SG6000 Issue StorageGRID GRID management user interface reports MTU mismatch error show when upgrade...Applies to NetApp StorageGRID 11.5 NetApp StorageGRID Appliance SG57xx NetApp StorageGRID Appliance SG6000 Issue StorageGRID GRID management user interface reports MTU mismatch error show when upgraded to 11.5 Despite changing the MTU in GUI, the MTU is still reporting incorrectly and the diagnostic alerts continues to persist This issue also observed in new systems with OS version 11.5.