Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • E-Series EF300/EF600 controller boots into UEFI shell
      https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E_Series_EF300_EF600_controller_boots_into_UEFI_shell
      Applies to NetApp E-Series EF300 and EF600 ATP M.2 mSATA device mSATA device firmware: Q0810B Issue EF300 or EF600 controller boots into UEFI boot menu following a reset. The controller continues to b...Applies to NetApp E-Series EF300 and EF600 ATP M.2 mSATA device mSATA device firmware: Q0810B Issue EF300 or EF600 controller boots into UEFI boot menu following a reset. The controller continues to boot into the UEFI menu even after manual reboot attempts.
    • Takeover and no console output and BMC access when trying to boot down node
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Takeover_and_no_console_output_and_BMC_access_when_trying_to_boot_down_node
      Applies to AFF-A700S AFF-A400 FAS8300 FAS8700 Issue The node that was down completely lost power There was no console output and BMC access even after a power cycle