Applies to NetApp E-Series SANtricity OS 11.80 Issue After staging SANtricity OS 11.80 on E-Series controller and before it is activated, a reboot of the controller causes it to get stuck in GRUB resc...Applies to NetApp E-Series SANtricity OS 11.80 Issue After staging SANtricity OS 11.80 on E-Series controller and before it is activated, a reboot of the controller causes it to get stuck in GRUB rescue mode upon boot up. The 7 segment display code appears to be 00 on the controller.
If a boot media replacement procedure is taking place, for some platforms the Service Image (BIOS) extracted EFI folder is required on an external USB flash drive to get to LOADER. The "Device Name" f...If a boot media replacement procedure is taking place, for some platforms the Service Image (BIOS) extracted EFI folder is required on an external USB flash drive to get to LOADER. The "Device Name" field will be rd0.0 for most platforms unless an external USB flash drive has been inserted into the controller then the boot device will show as rd1.0. AFF A200, AFF A220, AFF A300, AFF C190, and AFF A700 How to display the directory contents of a boot device from the LOADER prompt
