Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • How to change Bonding mode from ALB, or ActivePassive to LACP on a SolidFire Storage Node
      https://kb.netapp.com/on-prem/solidfire/hardware_Kbs/How_to_change_Bonding_mode_from_ALB_or_ActivePassive_to_LACP_on_a_SolidFire_Storage_Node
      Applies to NetApp Element Software NetApp SolidFire NetApp HCI Description This article describes how to change the Bonding mode from ALB, or ActivePassive Bonding to LACP Bonding Mode on a SolidFire ...Applies to NetApp Element Software NetApp SolidFire NetApp HCI Description This article describes how to change the Bonding mode from ALB, or ActivePassive Bonding to LACP Bonding Mode on a SolidFire / HCI Storage Node's network (1G or 10G) interface.
    • StorageGRID storage node LACP Bond does not start after reboot
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/StorageGRID_storage_node_LACP_Bond_does_not_start_after_reboot
      Applies to NetApp StorageGRID Issue Performance impact Rebooting Storage node the LACP Bond does not come up Intervention steps are required on the switch for example up / down switch ports to get wor...Applies to NetApp StorageGRID Issue Performance impact Rebooting Storage node the LACP Bond does not come up Intervention steps are required on the switch for example up / down switch ports to get working LACP going into suspend mode on the switches