Applies to ONTAP 9 Adaptive QoS (AQoS) Issue AQoS maximum latency seen when workload IO is less then configured maximum Volumes in the cluster show a problem where AQoS should be granting more IO than...Applies to ONTAP 9 Adaptive QoS (AQoS) Issue AQoS maximum latency seen when workload IO is less then configured maximum Volumes in the cluster show a problem where AQoS should be granting more IO than it apparently is Clients report filesysem mounting failures on NetApp volume (even for smaller volumes) associated with high latency reported from QOS limit
Nblade.CifsOperationTimedOut: Detected a timed out CIFS operation. SMB command code for this operation: 5 Number of times this command was suspended: 3994 Number of times this command was restarted: 0...Nblade.CifsOperationTimedOut: Detected a timed out CIFS operation. SMB command code for this operation: 5 Number of times this command was suspended: 3994 Number of times this command was restarted: 0 Last CSM error during this operation: CSM_OK Remote blade UUID: 00000000000000000000000000000000 Is QoS enabled: QoS_disabled Last SpinNp error during this operation: SPINNP_NO_FO_ERROR Client IP address: 192.168.10.200 Local IP address: 192.168.10.100 Target Vserver ID: 3 Target disk's DSID: 12345
