Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 7 results
    • Windows Guest OS reporting Event 129 Reset to device, \Device\RaidPort0
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Windows_Guest_OS_reporting_Event_129_Reset_to_device_Device_RaidPort0
      Multiple Windows Server 2016 VM goes to unresponsive state when Event ID 129 is reported and recovers automatically. 2020-05-04T14:43:08.215Z cpu54:65940)NMP: nmp_ThrottleLogForDevice:3616: Cmd 0x88 (...Multiple Windows Server 2016 VM goes to unresponsive state when Event ID 129 is reported and recovers automatically. 2020-05-04T14:43:08.215Z cpu54:65940)NMP: nmp_ThrottleLogForDevice:3616: Cmd 0x88 (0x43959767ba40, 9089744) to dev "naa.600a098000fb3005000004355d6f1da3" on path "vmhba64:C2:T1:L5" Failed: H:0x8 D:0x0 P:0x0 Invalid sense data: 0x0 0x0 0x0.
    • How to confirm that the E-Series DSM is correctly installed
      https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/E_Series__How_to_confirm_that_the_SANtricity_DSM_is_correctly_installed
      Applies to NetApp E-Series Windows Description How to confirm that the SANtricity DSM ( Device-specific Module for Multipathing) is correctly installed
    • Fail to create a SQL resource group in SnapCenter with a GUI error "unable to find the resources for the selection made"
      https://kb.netapp.com/data-mgmt/SnapCenter/SC_KBs/Fail_to_create_a_SQL_resource_group_in_SnapCenter_with_a_GUI_error_unable_to_find_the_resources_for_the_selection_made
      Applies to SnapCenter Server SnapCenter Plugin for SQL Server (SCSQL) Issue Creating an SCSQL resource group fails with error, "Unable to find resources for the selection made".
    • What is the default negotiated SMB version with various versions of Data ONTAP and Windows clients?
      https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/What_is_the_default_negotiated_SMB_version_with_various_versions_of_Data_ONTAP_and_Windows_clients
      The Server Message Block (SMB) protocol version used for file-sharing operation is determined during the negotiation process. It depends on the highest version supported by both the clients and the se...The Server Message Block (SMB) protocol version used for file-sharing operation is determined during the negotiation process. It depends on the highest version supported by both the clients and the servers. This table describes the protocol used with the default server/client configuration: Note: For more information, refer the Microsoft documentation on the support of the SMB 2 protocol on various Windows Operating System versions.
    • Host (3rd party OS) Troubleshooting Workflow
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Host_3rd_party_OS_Troubleshooting_Workflow
      This workflow helps you troubleshoot issues across various third-party software such as Solaris, AIX, HP-UX, Linux and VMware. Host connectivity issues.
    • OCUM 9.5 ocieau service starts and immediately stops after upgrade on Windows
      https://kb.netapp.com/Legacy/OnCommand_Suite/OCUM_9.5_ocieau_service_starts_and_immediately_stops_after_upgrade_on_Windows
      Applies to OnCommand Unified Manager 9.5 Windows Server PowerShell Issue OCUM 9.5 ocieau service starts and immediately stops after upgrade on Windows with no errors are reported in the installation l...Applies to OnCommand Unified Manager 9.5 Windows Server PowerShell Issue OCUM 9.5 ocieau service starts and immediately stops after upgrade on Windows with no errors are reported in the installation log file
    • Disk disappears in Windows Server post reboot
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Disk_disappears_in_Windows_Server_post_reboot
      Disks from the Windows Disk Management disappears whenever the server is rebooted. Affected host is showing as "logged in" in storage CLI with igroup show -v command. Status of target IQN under "Disco...Disks from the Windows Disk Management disappears whenever the server is rebooted. Affected host is showing as "logged in" in storage CLI with igroup show -v command. Status of target IQN under "Discovered targets" shows "Connected" in "iSCSI Initiator Properties" during the issue time. The domain name to which affected server belongs and domain name of host IQN in "Initiator Name" under "iSCSI Initiator Properties" shows different.