Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/False_stale_entry_in_Recovery_GURU_Cache_Backup_Device_Failed
      Applies to E-Series SANtricity Management Software E-Series System Manager
    • https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E-Series_Recovery_Guru_shows_Tray_-_Loss_of_External_Redundancy
      Applies to NetApp E-Series Issue SANtricity Recovery Guru reports: Tray - Loss of External Redundancy after attaching a new disk shelf
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/NET_SETUP_ERROR_reported_in_the_Recovery_Guru
      Applies to All E-Series Controllers All E-Series Firmware Issue NET_SETUP_ERROR is reported in the Recovery Guru Indicates an Ethernet configuration conflict, where both controllers have the same subn...Applies to All E-Series Controllers All E-Series Firmware Issue NET_SETUP_ERROR is reported in the Recovery Guru Indicates an Ethernet configuration conflict, where both controllers have the same subnet
    • https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/DRAWER_OPENED_Recovery_Failure_Type_Code__344_reported_in_recovery_guru_of_E_Series_array_when_drawer_is_closed
      Applies to All E-Series Firmware DE6600 enclosure DE460C enclosure Issue Failure entry about drawer opened seen in Recovery Guru when drawer is closed. Example: Failure Entry 1: DRAWER_OPENED-Recovery...Applies to All E-Series Firmware DE6600 enclosure DE460C enclosure Issue Failure entry about drawer opened seen in Recovery Guru when drawer is closed. Example: Failure Entry 1: DRAWER_OPENED-Recovery Failure Type Code: 344 Storage array: array1 Component reporting problem: Drawer 4 Status: Open Location: Drive shelf 0 Component requiring service: Drawer 4 Service action (removal) allowed: No Service action LED on component: No