Applies to ONTAP 9 SnapMirror Issue Deleting a Snapmirror fails with not supported for "RST" relationships: Failed Reason : Apply failed for Object: snapmirror Method: baseline. Reason: "snapmirror de...Applies to ONTAP 9 SnapMirror Issue Deleting a Snapmirror fails with not supported for "RST" relationships: Failed Reason : Apply failed for Object: snapmirror Method: baseline. Reason: "snapmirror delete" not supported for "RST" relationships.
Applies to Management Node 12.0 HCI 1.8 Issue rst command fails as below. Example : SF-DA15 ~ # rst -r sfsupport.solidfire.com -u element -p 50662 2020/08/28 05:37:06 socat[15880] E PROXY: 3 parameter...Applies to Management Node 12.0 HCI 1.8 Issue rst command fails as below. Example : SF-DA15 ~ # rst -r sfsupport.solidfire.com -u element -p 50662 2020/08/28 05:37:06 socat[15880] E PROXY: 3 parameters required kex_exchange_identification: Connection closed by remote host AIQ reporting is working normally. TCP session is not opened to proxy server with rst command.
Applies to ONTAP 9 NFS v3 Issue Event log shows frequent nfsConnResetAndClose error messages The reason listed in the error message is Packet is sent using the wrong port: Example: Wed Sep 30 14:31:19...Applies to ONTAP 9 NFS v3 Issue Event log shows frequent nfsConnResetAndClose error messages The reason listed in the error message is Packet is sent using the wrong port: Example: Wed Sep 30 14:31:19 CEST [Node-01: kernel: Nblade.nfsConnResetAndClose:error]: Shutting down connection with the client. Vserver ID is 3; network data protocol is NFS, Rpc Xid 0x-750XXXXX; client IP address:port is 10.10.10.11:300. local IP address is 10.10.10.20; reason is Packet is sent using the wrong port.
