Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/How_to_collect_health_check_data_from_Cisco_switches
      Applies to Cisco switches Description Specific health check commands to be collected from CISCO switches After collecting "show tech-support", the specific outputs to be reviewed.
    • https://kb.netapp.com/on-prem/Switches/NetApp-KBs/Upgrading_Nexus_3132_cluster_network_switch_causes_it_to_drop_into_switch_boot_prompt
      Applies to Cisco Nexus 3000 series switches Issue When upgrading a Nexus 3000 series with compact or full image to release 7.0(3)I7(7) or 7.0(3)I7(8), it will reload and comes up in switch boot prompt...Applies to Cisco Nexus 3000 series switches Issue When upgrading a Nexus 3000 series with compact or full image to release 7.0(3)I7(7) or 7.0(3)I7(8), it will reload and comes up in switch boot prompt. Following error is seen: Trim files after extracting TOR files ... error while upgrading the firmware /mnt/cfg/1 dir return 32 <<<<<<<<<<<<<<<<<<<<< Config partitions are not partitioned properly.\nDisk will be re-initialized. <<<<<<<<<<<<<<<<<<<<< switch(boot)# prompt is then shown