After applying Nexus-3232C Cluster-HA-Breakout RCF (Example: Nexus-3232C-RCF-v1.8-Cluster-Breakout.txt), Ethernet interfaces will not show any configuration: `cs2(config)# interface breakout module 1 ...After applying Nexus-3232C Cluster-HA-Breakout RCF (Example: Nexus-3232C-RCF-v1.8-Cluster-Breakout.txt), Ethernet interfaces will not show any configuration: `cs2(config)# interface breakout module 1 port 1-3 map 10g-4x` Error: Breakout map of 10g-4x is not supported on a 100G optic transceiver `cs2(config)# interface e1/1/1-4, e1/2/1-4, e1/3/1-4, e1/4/1-4, e1/5/1-4, e1/6/1-4, e1/7-30, e1/33-34` Errors will continue until the RCF lines are complete:
Applies to Cisco Nexus 3232C Cisco Nexus 3132Q-V Cisco Nexus 5596 Cisco Nexus 5596T Description This procedure is for loading switch firmware or RCF files onto a Cisco cluster switch from a removable ...Applies to Cisco Nexus 3232C Cisco Nexus 3132Q-V Cisco Nexus 5596 Cisco Nexus 5596T Description This procedure is for loading switch firmware or RCF files onto a Cisco cluster switch from a removable USB thumb drive. It eliminates the need for a TFTP or other webserver in environments where they are unavailable or it is not possible to use them.
