Applies to StorageGRID Network Receive Error (NRER) alarm Description StorageGRID still shows NRER alarms in the legacy alarm system despite the fact that fault conditions have been fixed. Alerts coul...Applies to StorageGRID Network Receive Error (NRER) alarm Description StorageGRID still shows NRER alarms in the legacy alarm system despite the fact that fault conditions have been fixed. Alerts could be due to : Minor Network Issue/outage Faulty SFP Faulty Cable Different MTU size between switch and nodes
Applies to StorageGRID 11.4 and above ESXi 7 Vmnet3 adapter Issue Alarm shows Network Receive Error NRER after upgrading the gateway and storage nodes to ESXi7 The "Receive Errors" counter increased d...Applies to StorageGRID 11.4 and above ESXi 7 Vmnet3 adapter Issue Alarm shows Network Receive Error NRER after upgrading the gateway and storage nodes to ESXi7 The "Receive Errors" counter increased during load spikes
Alert of "Node network reception frame error" is reported on GRID Alarms (NRER). This could be due to bad network SFP or cable. Refer to steps in the KB article to resolve the issue.
NetApp StorageGRID Appliance SG6000 The frame error counter (NRER) on StorageGRID network interface is continually increasing. Ifconfig output on the interface shows both receive (Rx) error and frame ...NetApp StorageGRID Appliance SG6000 The frame error counter (NRER) on StorageGRID network interface is continually increasing. Ifconfig output on the interface shows both receive (Rx) error and frame errors: RX packets 5557116789 bytes 2372433298793 (2.1 TiB) RX errors 761369 dropped 0 overruns 0 frame 761369 And ethtool output shows that rx_in_range_len_errors_phy counter has the same value (or same order of magnitude): root@host:~# ethtool -S hic2 | grep -i error