Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • '-E- Burning FS3 image failed' error when upgrading Element cluster
      https://kb.netapp.com/Legacy/NetApp_HCI/OS/E_Burning_FS3_image_failed_error_when_upgrading_Element_cluster
      Applies to NetApp Element software NetApp HCI Issue Error during Element upgrade when flashing NIC firmware: "E- Burning FS3 image failed: Flash write failed: Flash erase of address 0x400000 failed: M...Applies to NetApp Element software NetApp HCI Issue Error during Element upgrade when flashing NIC firmware: "E- Burning FS3 image failed: Flash write failed: Flash erase of address 0x400000 failed: MFE_REG_ACCESS_BAD_PARAM" Full output in Additional Information.
    • How to upgrade Mellanox Native ESXi Driver for VMware vSphere using CLI
      https://kb.netapp.com/Legacy/NetApp_HCI/OS/How_to_upgrade_Mellanox_Native_ESXi_Driver_for_VMware_vSphere_using_CLI
      Applies to NetApp HCI H300E compute node NetApp HCI H500E compute node NetApp HCI H700E compute node NetApp HCI H410C compute node NetApp HCI H610C compute node NetApp HCI H615C compute node VMware ES...Applies to NetApp HCI H300E compute node NetApp HCI H500E compute node NetApp HCI H700E compute node NetApp HCI H410C compute node NetApp HCI H610C compute node NetApp HCI H615C compute node VMware ESXi 6.5 VMware ESXi 6.7 After upgrading NetApp HCI components you noticed that the NIC driver firmware version on ESXi hosts is not the latest supported by NetApp You need to upgrade Mellanox Native ESXi driver for VMware vSphere using CLI (command line interface), click here for vCenter instructions
    • Element software upgrade fails during NIC firmware upgrade
      https://kb.netapp.com/Legacy/NetApp_HCI/OS/Element_software_upgrade_fails_during_NIC_firmware_upgrade
      Applies to NetApp HCI Element software upgrade from 11.2 and prior to 11.8 or higher Issue on mNode upgrade logs: E- Burning FS3 image failed: Flash write failed: Flash erase of address 0x400000 faile...Applies to NetApp HCI Element software upgrade from 11.2 and prior to 11.8 or higher Issue on mNode upgrade logs: E- Burning FS3 image failed: Flash write failed: Flash erase of address 0x400000 failed: MFE_REG_ACCESS_BAD_PARAM-E Full output on Additional Information