Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • How to troubleshoot Fibre Channel issues for StorageGRID Appliance SG6000
      https://kb.netapp.com/hybrid/StorageGRID/Platforms/How_to_troubleshoot_Fibre_Channel_issues_for_StorageGRID_Appliance_SG6000
      Applies to NetApp StorageGRID Appliance SG6000 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 stora...Applies to NetApp StorageGRID Appliance SG6000 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 storage controller(s) and the StorageGRID SG6000 compute node
    • How to troubleshoot Fibre Channel issues for StorageGRID Appliance SG5700
      https://kb.netapp.com/hybrid/StorageGRID/Platforms/How_to_troubleshoot_Fibre_Channel_issues_for_StorageGRID_Appliance_SG5700
      Applies to NetApp StorageGRID Appliance SG5700 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 stora...Applies to NetApp StorageGRID Appliance SG5700 Description This article gives an overview on general troubleshooting steps when Fibre Channel (FC) related issues occur between the E-Series E2800 storage controller and the StorageGRID SG5700 compute node
    • StorageGRID reports possible network isolation: node has no contact with other nodes
      https://kb.netapp.com/hybrid/StorageGRID/Maintenance/StorageGRID_reports_possible_network_isolation__node_has_no_contact_with_other_nodes
      Possible network isolation: Node has no contact with other nodes. If this warning persists, use the /usr/sbin/add_node_ip.py command to tell this node the address of another node in the grid. dynip | ...Possible network isolation: Node has no contact with other nodes. If this warning persists, use the /usr/sbin/add_node_ip.py command to tell this node the address of another node in the grid. dynip | Possible network isolation: Node has no contact with other nodes. Verify the network configuration such as VLAN configurations to the GRID network