Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 6 results
    • Attention LED light of DS460C is amber and “storage show fault -v” shows “FAIL, REPORT”
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/DS460C_shelf_Attention_Led_light_amber_hardware_status_is_normal_but_there_is_fail_report_under_the_status_description
      "storage show fault -v” command shows that the hardware status is normal but “FAIL, REPORT” is included in status descriptions 1 [IOM12 A] : OK 01,00,01,00 REPORT 2 [IOM12 A] : OK 01,00,01,00 REPORT 3..."storage show fault -v” command shows that the hardware status is normal but “FAIL, REPORT” is included in status descriptions 1 [IOM12 A] : OK 01,00,01,00 REPORT 2 [IOM12 A] : OK 01,00,01,00 REPORT 3 [IOM12 A] : OK 01,40,01,00 FAIL, REPORT 4 [IOM12 A] : OK 01,00,01,00 REPORT 5 [IOM12 A] : OK 01,00,01,00 REPORT 6 [IOM12 B] : OK 01,00,01,00 REPORT 7 [IOM12 B] : OK 01,00,01,00 REPORT 8 [IOM12 B] : OK 01,00,01,00 REPORT 9 [IOM12 B] : OK 01,00,01,00 REPORT 10 [IOM12 B] : OK 01,00,01,00 REPORT
    • IOM12 firmware version 0250 and later include an "A" suffix has ONTAP version dependencies
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/IOM12_firmware_version_0250_and_later_include_an_A_suffix_has_ONTAP_version_dependencies
      Applies to DS460C DS224C Shelves using IOM12 (Input Output Module). Issue Unable to install shelf firmware 0250 and later for IOM12 modules on certain versions of Data ONTAP.
    • Recurring self recovering SHELF_FAULT alerts on a DS212C disk shelf
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Recurring_self_recovering_SHELF_FAULT_alerts_on_a_DS212C_disk_shelf
      Sat Aug 15 00:04:39 GMT [node-1: dsa_worker0: ses.status.ModuleError:alert]: DS212-12 (S/N SHJHU123456789) shelf 20 on channel 2b SAS expander error for SAS shelf electronics 1: critical status. Sat A...Sat Aug 15 00:04:39 GMT [node-1: dsa_worker0: ses.status.ModuleError:alert]: DS212-12 (S/N SHJHU123456789) shelf 20 on channel 2b SAS expander error for SAS shelf electronics 1: critical status. Sat Aug 15 00:04:39 GMT [node-1: dsa_worker0: ses.status.ModuleError:alert]: DS212-12 (S/N SHJHU123456789) shelf 20 on channel 2b SAS expander error for SAS shelf electronics 2: critical status.
    • E-Series controllers go into OE LU after adding a new shelf
      https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E-Series_controllers_go_into_OE_LU_after_adding_a_new_shelf
      Applies to NetApp E-Series NetApp SANtricity OS pre 11.70.2 Issue When adding a new shelf to an existing array both controllers go into OE-LU lockdown and will not boot normally.
    • Drive Bypassed Causing Controller to Enter a Mixed-Path State
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Drive_Bypassed_Causing_Controller_to_Enter_a_Mixed-Path_State
      PHY/BAY STATE ON Cnt Cnt Cnt Count Count Count Prob Cnt Cnt Affiliation ::>system node run -node <nodename> -command sysconfig -a NetApp Release 9.5P2: Thu Mar 14 10:01:49 EDT 2019 System ID: 01234567...PHY/BAY STATE ON Cnt Cnt Cnt Count Count Count Prob Cnt Cnt Affiliation ::>system node run -node <nodename> -command sysconfig -a NetApp Release 9.5P2: Thu Mar 14 10:01:49 EDT 2019 System ID: 0123456789 (NODE-01); partner ID: 0123456788 (NODE-02) System Serial Number: 0123456789012 (NODE-01) System Rev: A4 System Storage Configuration: Mixed-Path ...
    • No In-Band ACP after adding shelves with IOM12 in an Out-of-Band cluster
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/No_In-Band_ACP_after_adding_shelves_with_IOM12_in_an_Out-of-Band_cluster
      Shelves with 6Gbps I/O Modules (IOM6) Shelves with 12Gbps I/O Modules (IOM12) Cluster configured in Out-of-Band ACP with IOM6 shelves node_1 2.12.B 1.2.02.10 02.10 iom6 active node_1 2.12.A 1.2.02.10 ...Shelves with 6Gbps I/O Modules (IOM6) Shelves with 12Gbps I/O Modules (IOM12) Cluster configured in Out-of-Band ACP with IOM6 shelves node_1 2.12.B 1.2.02.10 02.10 iom6 active node_1 2.12.A 1.2.02.10 02.10 iom6 active node_1 2.11.B 1.2.02.10 02.10 iom6 active node_1 2.11.A 1.2.02.06 02.06 iom6 active node_2 2.12.B 1.2.02.10 02.10 iom6 active node_2 2.12.A 1.2.02.10 02.10 iom6 active node_2 2.11.B 1.2.02.10 02.10 iom6 active node_2 2.11.A 1.2.02.06 02.06 iom6 active