The only way to reset an existing ESXi installation starting with NetApp HCI 1.6+ is to use the Factory Reset option from the Compute TUI It is recommended to use Linux dd command to do a raw copy of ...The only way to reset an existing ESXi installation starting with NetApp HCI 1.6+ is to use the Factory Reset option from the Compute TUI It is recommended to use Linux dd command to do a raw copy of the Compute BootStrap OS ISO image onto the USB key Note: due to the larger size of the compute ISO image, it is possible that RTFI may show failures if the USB key is created using 3rd party USB creator applications.
Applies to HCI Compute Hypervisor and Plug-in HCI Deployment Engine/Monitoring Agent Issue Troubleshooting HCI NDE failure for vCenter install. During NDE deployment, vCenter installation fails as see...Applies to HCI Compute Hypervisor and Plug-in HCI Deployment Engine/Monitoring Agent Issue Troubleshooting HCI NDE failure for vCenter install. During NDE deployment, vCenter installation fails as seen in the screenshot below:
Applies to NetApp Element Plug-In for VMware vCenter Server Element management node (mNode) VMware vCenter Issue mNode status shows as Down in the Settings tab in VCP Note: depending on VCP version th...Applies to NetApp Element Plug-In for VMware vCenter Server Element management node (mNode) VMware vCenter Issue mNode status shows as Down in the Settings tab in VCP Note: depending on VCP version this tab is named either mNode Settings or QoSSIOC settings
