This KB describes how to RTFI a SolidFire storage, NetApp HCI storage, or NetApp HCI compute node using the BMC For compute nodes that already have ESXi installed, using this procedure with NetApp HCI...This KB describes how to RTFI a SolidFire storage, NetApp HCI storage, or NetApp HCI compute node using the BMC For compute nodes that already have ESXi installed, using this procedure with NetApp HCI 1.6+ Compute BootStrap OS ISO image will update the firmware and the Bootstrap OS on that compute node leaving ESXi and configuration data intact.
Applies to NetApp HCI Compute nodes Issue vCenter has alerted with: Bootbank cannot be found at path '/bootbank' Unable to log in, power off, and vMotion the virtual machine on the host.
This article guides you through manually rebuilding the Docker swarm network when an IP address space conflicts with NetApp HCI. In some circumstances, after a successful NetApp HCI deployment, you mi...This article guides you through manually rebuilding the Docker swarm network when an IP address space conflicts with NetApp HCI. In some circumstances, after a successful NetApp HCI deployment, you might not be able to update the management services. This is caused when the Docker swarm overlay network address space (10.255.0.0/16) overlaps with your network. In this scenario, you need to recreate the overlay network in a different address space.
Applies to NetApp Element software Restore To Factory Image (RTFI) The steps required for creating an RTFI key and for using the key to re-image a NetApp SolidFire storage node SolidFire uses the Rest...Applies to NetApp Element software Restore To Factory Image (RTFI) The steps required for creating an RTFI key and for using the key to re-image a NetApp SolidFire storage node SolidFire uses the Restore To Factory Image (RTFI) process to image a node as a required part of the node replacement procedure. The node is imaged to ensure the Element software is running at the same version as the other nodes in the cluster. In order to image a node, you first need to create a bootable RTFI USB key.
Applies to HCI Compute Boot OS HCI Storage Element OS Distributed Power Management (DPM) Description This article describes how to disable DPM in VMware vCenter.
Applies to NetApp HCI H series storage nodes H series compute nodes Description This article describes the procedure to power off and power on a NetApp HCI cluster.
Applies to HCI Compute Boot OS HCI Compute Node Description This guide gives simple steps to escape from Safe Mode on HCI Compute Node in the following situations: Case 1. "Reboot Node" in NetApp Safe...Applies to HCI Compute Boot OS HCI Compute Node Description This guide gives simple steps to escape from Safe Mode on HCI Compute Node in the following situations: Case 1. "Reboot Node" in NetApp Safe Mode always end up to Safe Mode again. Case 2. Booting node always move to Safe Mode automatically.
Applies to HCI Compute Boot OS HCI Storage Element OS HCI Cluster Performance HCI Deployment Engine/Monitoring Agent Description This KB article has been replaced by docs.netapp.com content. See this ...Applies to HCI Compute Boot OS HCI Storage Element OS HCI Cluster Performance HCI Deployment Engine/Monitoring Agent Description This KB article has been replaced by docs.netapp.com content. See this procedure to update management services using the REST API.
