Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 9 results
    • SP update fails on FAS80XX
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/SP_update_fails_on_FAS80XX
      [kern_servprocd:info:5757] 0x80a408c00: 0: ERR: Servprocd::SpUpdate: transferImage: FTM sp_send_file failed to transfer /mroot/etc/RLM_FW/sp_image.tar.gz to SP. [kern_servprocd:info:5757] 0x80a408c00:...[kern_servprocd:info:5757] 0x80a408c00: 0: ERR: Servprocd::SpUpdate: transferImage: FTM sp_send_file failed to transfer /mroot/etc/RLM_FW/sp_image.tar.gz to SP. [kern_servprocd:info:5757] 0x80a408c00: 0: ERR: Servprocd::FTM: transfer_file: failed transferring /mroot/etc/RLM_FW/sp_image.tar.gz to sp://Node-01:/tmp/sp_image.tar.gz.
    • Does ONTAP support SMB multichannel?
      https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/Does_ONTAP_support_SMB_multichannel
      SMB Multichannel features are supported starting in ONTAP 9.4 SMB Multichannel features are NOT supported in any ONTAP release before ONTAP 9.4 SMB Multichannel - Provides multiple connections between...SMB Multichannel features are supported starting in ONTAP 9.4 SMB Multichannel features are NOT supported in any ONTAP release before ONTAP 9.4 SMB Multichannel - Provides multiple connections between ONTAP and clients in a single SMB session. Doing so improves throughput and fault tolerance for Hyper-V and SQL server over SMB configurations. SMB Multichannel may be nondisruptively applied to an existing SVM in ONTAP 9.4 and later Configuring SMB Multichannel for performance and redundancy
    • Old SAS HBAs migrated to FAS8000 during upgrade
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Old_SAS_HBAs_migrated_to_FAS8000_during_upgrade
      Applies to New FAS8000 deployments with older X2065A-R6 SAS Host Bus Adapter (HBA) cards as part of head swap upgrade or installing an older X2065A-R6 card from spares. Issue Check Active IQ if this i...Applies to New FAS8000 deployments with older X2065A-R6 SAS Host Bus Adapter (HBA) cards as part of head swap upgrade or installing an older X2065A-R6 card from spares. Issue Check Active IQ if this impacts your systems Log files might report occasional Peripheral Component Interconnect (PCI) errors.
    • 7MTT: Create one or more intercluster LIFs on the affected nodes
      https://kb.netapp.com/Legacy/ONTAP/7Mode/7MTT__Create_one_or_more_intercluster_LIFs_on_the_affected_nodes
      Applies to 7MTT Issue The following error message is reported when attempting to use the 7-Mode Transition tool to copy CIFS data over to clustered Data ONTAP 8. Error (60073) Create one or more inter...Applies to 7MTT Issue The following error message is reported when attempting to use the 7-Mode Transition tool to copy CIFS data over to clustered Data ONTAP 8. Error (60073) Create one or more intercluster LIFs on the affected nodes by using the following command: 'network interface create -vserver' 7MTT pre-check fails with following error message: Checking whether volumes on the SVM '<SVM>' can have SnapMirror relationships with volumes on the 7-Mode storage system 'x.x.x.x'.
    • The SP continues to boot into the backup firmware image after an upgrade to SP firmware 5.1
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/The_SP_continues_to_boot_into_the_backup_firmware_image_after_an_upgrade_to_SP_firmware_5.1
      Applies to AFF-A200, AFF-A300, FAS2650, FAS8200 After an upgrade to SP firmware 5.1, the SP continues to boot into the backup firmware image. Even though the new firmware version is showing as install...Applies to AFF-A200, AFF-A300, FAS2650, FAS8200 After an upgrade to SP firmware 5.1, the SP continues to boot into the backup firmware image. Even though the new firmware version is showing as installed to the primary image, the SP continues to boot into the backup image: version Booted backup firmware version 5.0.1 Primary firmware version 5.1 Backup firmware version 5.0.1 Firmware Version: 5.0.1 Mgmt MAC Address: 00:A0:98:A9:C2:9D Ethernet Link: up, full duplex, auto-neg complete
    • SSH fingerprints change every time an SVM LIF is migrated to other nodes in the cluster
      https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/SSH_fingerprints_change_every_time_an_SVM_LIF_is_migrated_to_other_nodes_in_the_cluster
      After migrating an SVM LIF, SSH connections fail or display the following banner: IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! It is also possible that a host key has just been changed. The f...After migrating an SVM LIF, SSH connections fail or display the following banner: IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! It is also possible that a host key has just been changed. The fingerprint for the RSA key sent by the remote host is Add correct host key in /.../.ssh/known_hosts to get rid of this message. Offending RSA key in /.../.ssh/known_hosts: RSA host key for xxx.xxx.xxx.xxx has changed and you have requested strict checking.
    • NetApp adds new MAC address OUI range to shipping systems
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/NetApp_adds_new_MAC_address_OUI_range_to_shipping_systems
      Storage controllers with MAC addresses from the new pool that are reverted to versions of ONTAP prior to those listed in the above section and joined to existing ONTAP clusters will continue to functi...Storage controllers with MAC addresses from the new pool that are reverted to versions of ONTAP prior to those listed in the above section and joined to existing ONTAP clusters will continue to function normally until such time as the final storage controller from the old MAC address pool is removed.
    • Native FPolicy is not consistently stopping blocked file extensions in clustered Data ONTAP
      https://kb.netapp.com/on-prem/ontap/da/NAS/NAS-KBs/Native_FPolicy_is_not_consistently_stopping_blocked_file_extensions_in_clustered_Data_ONTAP
      Applies to ONTAP 9 FPolicy When attempting to implement an FPolicy with the internal engine in order to block executable files being saved on a specific share After applying all the Fpolicy configurat...Applies to ONTAP 9 FPolicy When attempting to implement an FPolicy with the internal engine in order to block executable files being saved on a specific share After applying all the Fpolicy configurations, it is still possible to save files on the share. Fpolicy event configuration: ::> vserver fpolicy policy event show -vserver fpolnative -event-name test Vserver: fpolnative File Operations: create Filters: - (!! ensure that there are no filters specified !!) Is Volume Operation Required: false
    • Unable to update Service Processor: SP is not Cluster Service capable
      https://kb.netapp.com/Legacy/ONTAP/Clustered_Data_ONTAP_8/Unable_to_update_Service_Processor__SP_is_not_Cluster_Service_capable
      Service Processor firmware upgrade fails with error 'SPAutoUpgradeFailedMajorAlert' when running Data ONTAP 8.3 or later. This could be caused when the Service Processor firmware is not compatible wit...Service Processor firmware upgrade fails with error 'SPAutoUpgradeFailedMajorAlert' when running Data ONTAP 8.3 or later. This could be caused when the Service Processor firmware is not compatible with ONTAP Cluster Mode. Refer to this article for steps to resolve the issue.