Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 7 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/How_to_collect_Trace_Buffers_from_E-Series_Storage_Array
      Applies to All E-Series hardware platforms. Description This KB will explain how to collect trace buffers from a storage array system.
    • https://kb.netapp.com/on-prem/E-Series/SANtricity-OS-KBs/What_is_the_maximum_configurable_SSD_cache_size_on_E_Series_storage_systems
      Maximum amount of configurable SSD cache for an array is related to the controller's primary cache size. This chart shows the amount of SSD cache configurable for various primary cache size of the con...Maximum amount of configurable SSD cache for an array is related to the controller's primary cache size. This chart shows the amount of SSD cache configurable for various primary cache size of the controllers: Up to 2 GB > 4 GB to 8 GB Controller Cache Size Configurable SSD Cache Size > 1 GB to 2 GB > 2 GB to 4 GB Controller's primary cache size will be smaller than the controller installed memory size The size difference will vary depending on the release version and array configuration.
    • https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/What_are_the_E_Series_Controller_Shell_Passwords
      Applies to All E-Series controller platforms All E-Series firmware revisions Description To access the shell of a legacy LSI system or a current NetApp E-series system, you must have the correct user ...Applies to All E-Series controller platforms All E-Series firmware revisions Description To access the shell of a legacy LSI system or a current NetApp E-series system, you must have the correct user login and password.
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/add_directory_service_in_E_series__failed_LDAP_user_search
      Applies to NetApp E-Series and EF-Series Symptom Received error “failed LDAP user search” while trying to add directory service in E-Series
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/How_to_run_CLI_scripts_and_commands_for_systems_running_11.60_and_11.70_firmware
      Applies to NetApp E-Series Description An instruction on how to use SMcli on Arrays running 11.60 or 11.70 systems, they should be managed via Unified Manager.
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/How_to_manually_start_a_battery_learn_cycle_using_SANtricity
      Applies to NetApp E-Series Description These procedures show how to kick off a battery learn cycle from SANtricity Storage Manager.
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/What_is_the_usable_capacity_of_drives_in_E_Series_storage_systems
      The usable capacity of each drive is reported in the Storage Array Profile, and is used by SANtricity Storage Manager to calculate the total unconfigured capacity reported for the storage array. Once ...The usable capacity of each drive is reported in the Storage Array Profile, and is used by SANtricity Storage Manager to calculate the total unconfigured capacity reported for the storage array. Once a volume group or disk pool is created, the usable capacity from the member drives is used to report the free capacity for the volume group or disk pool. So, the free capacity for the volume group will be less than the total of the usable capacity of the unassigned drives.