It is the customer responsibility to register all the switches purchased from NetApp directly with Cisco or a Cisco reseller as well change entitlements or to renew their systems to get support for th...It is the customer responsibility to register all the switches purchased from NetApp directly with Cisco or a Cisco reseller as well change entitlements or to renew their systems to get support for the switches. If the switch was purchased with Cisco's onsite replacement entitlement, a Cisco onsite field engineer can reconfigure the switch for management access, load the desired NX-OS version, and reload the RCF file if instructed to do so prior to going onsite.
Please send a request to BroadcomBES@techdata.com, provide the part number and the serial number of each switch that you are looking to buy or check the status of the contract for, the planned time fr...Please send a request to BroadcomBES@techdata.com, provide the part number and the serial number of each switch that you are looking to buy or check the status of the contract for, the planned time frame of the purchase, your name, title/position, company name, address, and phone contact information.
08:00.0 Fibre Channel: Cisco Systems VIC FCoE HBA (rev a2) Subsystem: Cisco Systems VIC 1240 MLOM FCoE HBA The sd-trace.log of the actual SnapDrive storage shows -all command: addErrorReport: (1) Oper...08:00.0 Fibre Channel: Cisco Systems VIC FCoE HBA (rev a2) Subsystem: Cisco Systems VIC 1240 MLOM FCoE HBA The sd-trace.log of the actual SnapDrive storage shows -all command: addErrorReport: (1) Operation:??? 6 1877:HBA assistant not found. 0002-197 Admin error: Please verify that the appropriate transport protocol, volume manager, file system and multipathing type are installed and configured in the system. If NFS is being used, this warning message can be ignored.
