Applies to ONTAP 9 9.10.1P13+ 9.11.1P10+ 9.12.1P3+ 9.13.1RC1+ Description Installing NLFs via the CLI as HTTPS/System Manager is not available in the environment
Applies to ONTAP System Manager (OSM) Storage admin would need to know which individual WWPN belongs to which host. Depending on the SAN environment, there could be hundreds of initiators in that list...Applies to ONTAP System Manager (OSM) Storage admin would need to know which individual WWPN belongs to which host. Depending on the SAN environment, there could be hundreds of initiators in that list. Each host advertises its name and OS to the fabric name server. ONTAP should query this information, so that it can be used for simpler host management. Add alias on CLI for each individual WWPN and pre-create the igroup(s). Please contact your NetApp or partner team for roadmap information.
Applies to ONTAP 9 Description CLI and ZAPI performance information is now viewable and configurable at the CLI Data output includes Session info Command logging Command latency Per user information A...Applies to ONTAP 9 Description CLI and ZAPI performance information is now viewable and configurable at the CLI Data output includes Session info Command logging Command latency Per user information Administrator tasks are also available Session/command throttling/blocking Session termination
Applies to ONTAP 9 Description When you require a bit more information when working with the ONTAP CLI, you can change the prompt to include the date and time when the last command completed.
Applies to ONTAP 9 Answer In sis status -l the last Deduplication/Compression scan run and its statistics is collected. If there is no Dedupe/Compression enabled (or run for a long time) these logs wi...Applies to ONTAP 9 Answer In sis status -l the last Deduplication/Compression scan run and its statistics is collected. If there is no Dedupe/Compression enabled (or run for a long time) these logs will be not captured by Autosupport. Additional Information NetApp Active IQ reports only one volume's storage efficiency information
Applies to NetApp E-Series Description An instruction on how to use SMcli on Arrays running 11.60 or 11.70 systems, they should be managed via Unified Manager.
Applies to ONTAP System Manager 9.8 Answer Many of the LUN options that were accessible in previous versions of System Manager have been removed. Some of these have been removed because they were infr...Applies to ONTAP System Manager 9.8 Answer Many of the LUN options that were accessible in previous versions of System Manager have been removed. Some of these have been removed because they were infrequently used. Some were removed because they go against NetApp best practices. Others are now defaults. Workaround: Use the CLI for many of the historical LUN options. Additional Information NetApp System Manager Product Management is aware of this request.
AutoSupport collects only the latest log messages written to each log file. Very active logging may trigger log rotation and some logs may not be captured in Autosupport messages. Due to payload limit...AutoSupport collects only the latest log messages written to each log file. Very active logging may trigger log rotation and some logs may not be captured in Autosupport messages. Due to payload limits, some diagnostic logging is not included in AutoSupport messages. NetApp Support may request a manual collection of ALL the files from a Node. Use the following procedure to complete this request. Any files named corefile that might be found the /mroot/etc/log directory tree
Applies to AVA400 AVA800 AVA-v Description There will be times when the local cache/RAID Group space usage has to be checked from CLI while troubleshooting space full situations
Applies to ONTAP 9 Netapp License File (NLF) Command Line(CLI) Description Removal of NLF bundles via the CLI as HTTPS/System Manager is not available in the environment.