Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/Asynchronous_mirror_group_member_has_failed_following_a_volume_transfer
      Applies to SANtricity OS 8.30.01 Asynchronous Mirror Group (AMG) Auto Load Balancing enabled (ALB) Issue AMG enters failed state following events present in event log: 7C06: Asynchronous mirror group ...Applies to SANtricity OS 8.30.01 Asynchronous Mirror Group (AMG) Auto Load Balancing enabled (ALB) Issue AMG enters failed state following events present in event log: 7C06: Asynchronous mirror group member has failed 204A: Auto Load Balancing implicit volume transfer
    • https://kb.netapp.com/on-prem/E-Series/SANtricity-OS-KBs/E-Series_Asynchronous_mirror_group_suspended_internally_due_to_mismatched_volume_ownership
      Applies to All E-Series Platforms All Firmware Releases Asynchronous Mirror Group (AMG) Issue AMG enters suspended state The following MEL event is logged: Event Type: 7C02 Description: An asynchronou...Applies to All E-Series Platforms All Firmware Releases Asynchronous Mirror Group (AMG) Issue AMG enters suspended state The following MEL event is logged: Event Type: 7C02 Description: An asynchronous mirror group was suspended internally The following entry will be found in the Recovery Guru: ARVM_SYNC_INTERNALLY_SUSPENDED
    • https://kb.netapp.com/on-prem/E-Series/SANtricity-OS-KBs/Communication_to_remote_volume_down
      Applies to E-series Asynchronous Remote Volume Mirroring (ARVM) Issue Storage Manager reports the following error in the GUI : Data could not be loaded from the storage array. One possible cause is th...Applies to E-series Asynchronous Remote Volume Mirroring (ARVM) Issue Storage Manager reports the following error in the GUI : Data could not be loaded from the storage array. One possible cause is the object on which you you were performing the operation no longer exists. Other possible causes include network issues, inability to communicate with the controller, or loss of power to the storage array. Check these causes and then retry the operation.
    • https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E-Series_ARVM_volume_resize_is_not_visable_in_vCenter
      Applies to E-Series VMware ESXi 5.5 and above asynchronous remote volume mirroring (ARVM) Issue After volume expansion of ARVM volume of a supported host operating system VMware does not expand the da...Applies to E-Series VMware ESXi 5.5 and above asynchronous remote volume mirroring (ARVM) Issue After volume expansion of ARVM volume of a supported host operating system VMware does not expand the datastore and can not detect the new free space Alert : E-Series Notification (Communication to remote volume down) CRITICAL