Applies to NetApp HCI NDE 1.8 and beyond Description While expanding existing HCI cluster with compute nodes configured with two cable option, using APIPA (zeroconf) addressing, the NDE inventory page...Applies to NetApp HCI NDE 1.8 and beyond Description While expanding existing HCI cluster with compute nodes configured with two cable option, using APIPA (zeroconf) addressing, the NDE inventory page displays an error: X node(s) cannot be displayed due to a problem with the network configuration. To deploy the missing node(s), ensure that jumbo frames are enabled on the switch ports connected to the node's virtual machine ports and storage ports. Doesn't discover any compute nodes
NDE log shows EnableAutoip API call is failed due to taking too long on the 'Validating Deployment Data' stage. 2022-03-25T09:05:34.575597Z | 18246 | 117730296 | HCI-T73-task:14-Validate | sf_raw_api:...NDE log shows EnableAutoip API call is failed due to taking too long on the 'Validating Deployment Data' stage. 2022-03-25T09:05:34.575597Z | 18246 | 117730296 | HCI-T73-task:14-Validate | sf_raw_api:91 | INFO | SolidFire Raw API POST took 64.83 seconds and returned status_code=200, body={'error': {'code': 500, 'message': 'Failed to start AvahiClient={Bond10G pidfile=[/var/run/avahi-autoipd.Bond10G.pid]}', 'name': 'xCheckFailure'}, 'id': None}
NDE fails at between 11-75% in the configuring the network task, changing network settings of the storage nodes Bond1G (management) address is assigned to the storage node but Bond10G (storage) is not...NDE fails at between 11-75% in the configuring the network task, changing network settings of the storage nodes Bond1G (management) address is assigned to the storage node but Bond10G (storage) is not Some nodes are configured with static Bond10G interface and others are configured with DHCP (APIPA address) The Bond Mode on the Bond10G interfaces of storage nodes is set to ActivePassive instead of LACP NDE shows "The gateway is not valid" during network validation
